Car specifications » Opel cars »

Opel Monza 3.0

Bodywork

type 2+2 FHC
doors 2

Engine information

Bore × stroke 95.00 mm × 69.80 mm 3.74 in × 2.75 in
Cylinders S-6
Displace 3 litre 2969 cc (181.179 cu in)
Engine type SOHC
Valves 2 valves per cylinder | 12 valves in total
Engine construction cast iron block & head
Sump Wet sumped
Compression ratio 9.20:1
Fuel system 1 DVG 4 A1 carburettor
Maximum power
0-50 mph
0-60 mph
0-100 mph
0-100 km/h 9.50 s
80 - 120 km/h
402 m (Quarter mile)
Standing km
Top speed 198 km/h (123 mph)
Fuel consumption
CO2 emissions
Power to weight ratio 107.64 bhp/ton
Specific output
Maximum torque
bmep 973.5 kPa (141.2 psi)
Specific torque 77.47 Nm/litre
Maximum rpm
Code
Main bearings 7
Coolant Water
Bore / stroke ratio 1.36
Unitary capacity 494.83 cc/cylinder
Aspiration Normal
Compressor type N/A
Intercooler None
Catalytic converter N

Dimensions and weight

wheelbase 2668 mm
wheelbase 105 in
Length (milimeters) 4692 mm
Length (inches) 184.7 in
Width (milimeters) 1734 mm
Width (inches) 68.3 in
Height (milimeters) 1380 mm
Height (inches) 54.3 in
L:W ratio 1.76
Ground clearance (milimeters) 140 mm
Ground clearance (inches) 5.5 in
Kerb weight (kilograms) 1375 kg
Kerb weight (pounds) 3031 lb
Weight distribuiton
Fuel capacity (litres) 70 litres
Fuel capacity (UK Ga) 15.4 UK Ga
Fuel capacity (US Gal) 18.5 US Gal

Aerodynamics

Drag coefficient
Frontal area
Cx

Chassis

Engine location Front
Engine alignment Longitudinal
Drive RWD
Steering recirculating ball PAS
Turns lock-to-lock 4.000
Turning circle 10.80 m
Tyres 175 R 14 88H
Wheels 6J x 14
Brakes F/R Di/Di-S
Brake ∅
Braked area
Transmission 4M
Top gear ratio 1.00
Final drive ratio 3.45

General information

RAC rating 33.6
Number made
Model code
Model family
Insurance classification No information available
Tax band No information available

Manual Download

Download 1979 Opel Monza 3.0 PDF Manual
Designer unknown
Year 1979

Similar cars

Tags