Trailer Hitch Installation - 2007 Buick Rendezvous - etrailer.com

Description

www.etrailer.com Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. Today on this 2007 Buick Rendezvous we are going to install part number 87004 from Hidden Hitch. This will also apply to part number 75430 from Draw-Tite. First off we will show you where the hitch mounts up to the frame of the vehicle. It is going to use these two existing holes at the bottom of the frame and there are going to be two holes that we need to drill in this pinch weld right here also. We will use the hitch as a template to hold everything together while we drill.We can get right to installing the hardware into the vehicle. We are going to be using this three inch long block and this carriage bolt right here. 00:32 What is going to happen is it is going to fit on the inside of the vehicle and it is going to be sitting at an angle like this on the inside so they will not be overlapping each other but they will be sitting side by side. To get the hardware in position we are going to be using what is called a bolt leader and that does not come with the kit but it is sold separately as part number 80101-1. This is our bolt leader and it has got the threads on the end. We are just going to screw the bolt into it to pull it through. Put it through the hole we are going to use first and then out our access hole which is basically the other hole we are going to use. We are going to slide our block into place, just push on top of <b>...</b>

Keywords

etrailer.com, 87004, 75430, 80101-1, 2007 Buick Rendezvous, 2007, 07, Buick Rendezvous, hitch, trailer hitch, install, installation, trailer hitch install, hitch installation, Hidden Hitch, Reese, Draw-Tite, Draw Tite, Drawtite, bolt leader, tools

Related videos ^Experimental