How to instal 6x9 speakers in a toyota corolla S [HD]

Description

This is my tutorial on how to install 6x9 speakers in a toyota corolla Step 1: Lower seats by pulling the "lower seats" nobs in the trunk Step 2: Lower them, then grab your phillips screw driver and remove the panel behind the seats. there will be three or four screws to remove. step 3: Remove the white panel on the left and right side of the car. Pry these with a philips flat head, or tug on it but be careful, you do not want to break clamps Step 4: Remove the large black plastic piece covering the speakers. Same as above, you may pry it out but you can also tug on it until all clamps are off. Do not break them. Step 5: Remove he four bolts surrounding the speaker. They are 10mm and you need to use a socket step 6: remove old speakers, cut clamp if new speakers do not come with a clamp. step 7: solder them after wire clamp is removed. [ONLY IF NECESSARY] step 8: Install new speakers, if they do not match up drill new holes or zip tie them. yes the zip ties do hold very well. step 8: everything in reverse order. step 9: like this video and comment if you have any questions.

Keywords

6x9, speakers, toyota, corolla, car, audio, sub, amp, bass, head, unit, stock, system, loud, soldering, tutorial, wire, cutters, yt:stretch=16:9

Related videos ^Experimental