Trailer Wiring Harness Installation - 2008 Toyota Corolla - etrailer.com

Description

www.etrailer.com Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. Today on this 2008 Toyota Corolla we are going to install part number 118387 from Tow Ready. Our connection point is going behind the carpeting here so that means we are going to take this carpeting loose here, we are going to take off the threshold, and get it out of the way so we can route our wires from one side to the other. So far I am going to take out this floor cover here and right now the threshold itself. Make sure you get the fittings underneath here. There it goes. Work on the carpeting here. 00:50 All right we will start making our first connection. This is where our wire harness will plug in at behind the tail light. What you want to do is push the little button back here so the inside part comes out. It is kind of hard to see so you will have to do it by feel that it is there. All right then we will take our wire harness and we will plug that back in the same spot. Make sure it snaps. These are our other two we are going to plug back together. Then all that remains now is we need to find a good place to ground it, our wire harness. We will use this sheet metal like a shelf right here on the body work and it should work just fine. On a thinner sheet metal you want to attach it by hand so you do not over drill it and go through it really easy and strip it out. 02:06

Related videos Experimental

1987 Buick GNX 223 on Classic Car and Driver Flashback Honda Accord Commercial

Related cars