Trailer Hitch Installation - 2004 Ford Freestar - etrailer.com

Description

www.etrailer.com Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. Today on this 2004 Ford Freestar we are going to be installing Hidden Hitch part number 87107. And this installation will also apply for Draw-Tite hitch part number 75158. We are underneath the vehicle and the first thing we want to do is go ahead and lower the exhaust down off of its rearmost hanger. This is going to give us a little bit more working room when we go to put the hitch up into position. To remove the exhaust from its hanger, I am going to use a spray lubricant like WD-40 and go ahead and stray the stud down. And then with it sprayed down, we just want to go ahead and take either a pair of pliers or a pry bar and separate the two pieces. 0:41 And then starting over here on the driver side of the vehicle, we are going to go ahead and point out the mounting holes we are going to be using to attach the trailer hitch to the vehicle. Looking at the outboard side of the frame, nearest the bumper, you can see we have two existing holes. Those are going to provide our two attaching points over here on the driver side of the vehicle. And then moving over to the passenger side, on the outboard side of the frame, we are going to be again using the same two holes that we are going to us on the driver side. But, there is a third attaching point over here on the passenger side, at the bottom of the frame. When we get the hitch up into <b>...</b>

Keywords

etrailer.com, 87107, 75158, trailer, hitch, receiver, install, installation, 2004, ford, freestar, freestar ford 2004, hidden hitch, draw tite, reese, valley, curt

Related videos ^Experimental