Trailer Hitch Installation - 2005 Pontiac Montana - etrailer.com

Description

www.etrailer.com Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. Today we are going to do an install of part number 90148 on our 2005 Montana. The first thing I am going to show you is where the hitch goes. It will mount up here. These two bolts will come out temporarily, and this exhaust bracket will come off temporarily. The hitch will mount up with these bolts here, and the hitch will serve as a template to drill out two holes. There will be one up here in this general vicinity and back here. On some models, these holes are pre-existing. It just depends on what you have. And on the drivers side it will mount on these two holes here and plus an additional hole up in this general area here will have to be drilled out also. Now these bolts will be replaced by the bolts that come with the hitch. All right, on some models you might actually have an air compressor that is a load-leveling device. That comes equipped on some models. If you have that you should only need one bolt on there and then the other bolt hole will actually be covered up. What you do is put the hitch upon there like normal go ahead and drill out the second hole - just through the bracket, and try not to hit the nut. And then take the hitch back down. Then put the hitch up flat to the frame. And then the bracket for the compressor goes on top of the hitch. All right, at this point we can go ahead and install the hitch. We are going <b>...</b>

Keywords

etrailer.com, montana pontiac 2005, 90148, install, installation, 2005, 05, pontiac, montana, hitch, trailer hitch, receiver, hidden hitch, hidden, drawtite, draw-tite, reese, curt, valley

Related videos ^Experimental