Trailer Wiring Harness Installation - 2006 Pontiac Montana - etrailer.com

Description

www.etrailer.com Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. Today on this 2006 Pontiac Montana we are going to be installing wiring harness part number 118396. We are at the rear of the vehicle, with the cargo door open, and we want to go ahead and locate the port that our wiring harness is going to be plugging into. The ports are located directly behind the taillight on both the driver and passenger side. So the first thing that we want to go ahead and do is remove both taillight assemblies. Holding the taillight in place on the inboard side are two torque headed bolts. We need to go ahead and take those out. 0:38 With the taillight removed, you can look at the back side here. This main port is the port we are going to be using to plug our wiring harness into. So, I am just going to go ahead and separate the two pieces. There is a tab up top. You just want to press that in and pull away from the taillight. And that separates them. Over here on our driver side, we are going to plug in our ports that have the yellow and brown wires in them. These are basically just going to plug inline in that disconnect point we just made. I am going to leave the taillight off for the time being. What we are going to do is take the passenger side connector, along with the 4-pole, and we are going to feed them down through the opening in between the body and the bumper 1:15 OK, with those fed through, over here <b>...</b>

Keywords

etrailer.com, 118396, custom, fit, vehicle, wiring, harness, wire, electrical, install, installation, 2006, pontiac, montana, montana pontiac 2006

Related videos ^Experimental