Trailer Wiring Harness Installation - 1991 Dodge Dynasty - etrailer.com

Description

www.etrailer.com Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. Today we are going to install part number 118172 from Draw-Tite, and we are going to install this on a 1991 Dodge Dynasty. To begin our install, we have to get behind the wiring harness. It is going to be behind the carpet here and here. We are just going to pull away this carpet a little bit and get to the back here. And this is the wiring harness right here, and you can tell it comes from the front to the rear and splits off to the left and the right sides. We have already kind of cut into it so we could see where the wiring was at. And these are our wires. We will go ahead and use our tester and prove which wire does what for what function. First off, we want to start with the running lights, so we will go ahead and turn those on and test to see which one is that. OK: off, and on. OK, we know that is the running lights, so we will go ahead and make our first connection. We will use a Scotch lock and slide it over one wire, and then slide the brown wire to our running light circuit, onto the side of it, and then squeeze down with a pair of pliers. Now we will go ahead and test for the right-turn signal. OK, there is our right-turn signal, that is the one with a black stripe, so we will go ahead and hook up our green wire for right turn. OK, then we will do the same thing with the left turn. OK, we put the green wire with the black <b>...</b>

Keywords

118172, install, installation, wire, wiring, harness, electrical, t1, four, pole, 1991, 91, dodge, dynasty, etrailer.com, etrailer

Related videos ^Experimental