Trailer Hitch Installation - 1995 Buick Le Sabre - etrailer.com

Description

www.etrailer.com Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. Today on this 1995 Buick LeSabre, we are going to install part number 24625 from Draw-tite. Our first step involved is actually taking out this inboard bolt right here for the energy absorber and loosening this bracket. The hitch is going to sit on top of the energy absorber and the bracket is going to sit on top of that, so that means we are going to have to take this bolt out. It gets replaced and this one here we are going to take loose, put some spacers behind it, and then put it back together. So the bracket will match the width of the hitch itself. We are going to have to do that on both sides. :30 We are looking at the drivers side then we are going to have to go over to the passenger side and do the same thing but at least it does not have an exhaust bracket there. We just have to take out the bolts on that side. We are just going to let this go, hold it out of our way. We will go back over to the passenger side. At this point we can go ahead and put the hitch up into position. What we are going to do is see what all we have to modify to put the hitch up into place. That means some rivets and the heat shield since the hitch arms have to flat on the frame itself. 1:03 And what we are going to do is use a marker and just put a line in for our arm where the hitch is going to sit. If there are any rivets between the hitch and the <b>...</b>

Keywords

etrailer.com, 1995, 95, buick, lesabre, le sabre, trailer, hitch, install, installation, draw-tite

Related videos ^Experimental