Trailer Hitch Installation - 2010 Buick Enclave - etrailer.com

Description

www.etrailer.com Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. Today on this 2010 Buick Enclave we are going to be installing Draw-Tite hitch part number 75528. This installation will also apply to Hidden Hitch part number 87435. We are looking at the underside of the vehicle. On this Enclave you can see we have this fascia door covering. We want to remove that. There are two screws here on the bottom holding it in. Then we can just set it off to the side. :26 The next thing we want to do is go ahead and lower down our exhaust to give us more room to gain access to the frame. This particular model has duel exhaust so we are going to need to lower both sides down. There are two sets of hangers per side that we need to remove the exhaust off of. To lower the exhaust down off its hangers we need to take a spray lubricant, like a WD-40 and spray the studs down. Then we can take a pair of pliers or a pry bar and separate the two pieces. We will repeat that for the outboard side one as well. :56 We are going to repeat the same thing for the driver side exhaust as well. Before we take those down off the hangers we want to go ahead and support the main cross tube of the exhaust system because once we lower it off of both sides the system is going to want to fall if it is not properly supported it could damage it. With the exhaust lowered we can go ahead and point out the mounting holes we are going to be <b>...</b>

Keywords

etrailer.com, Enclave, 10, 2010, buick, install, installation, trailer, hitch, draw-tite, draw, tite, hidden, 75528, 87435

Related videos ^Experimental