Trailer Hitch Installation - 2006 Chrysler PT Cruiser - etrailer.com

Description

www.etrailer.com Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. Today we are going to install part number 60818 from Hidden Hitch on our 2006 Chrysler PT cruiser. This install also applies to part number 24759 from Draw Tite. Alright, the hitch will attach where this tow hook is. This tow hook will be removed and kept off. The hitch will be bolt into place right here and also there will be a part in the frame up a little further around this area that we will have to drill out for access of a carriage bolt. It is basically the same thing on both sides. On the driver side we are going to have to lower the muffler to get to the access there. Also we took down the spare tire for now. Theoretically you should not have to take it down but it makes it just a little bit easier to put the hitch back up against the bumper and then put the spare tire up when you are done. First of all, remove the exhaust hangers. On this model they are actually bolted on so you do not have to slide off the rubber hangers, we will just unbolt them from the frame. There is one back here in front of the axle so it might be a good idea to loosen them and give you just a little bit of extra wiggle room. Next we have to take off the tow hook. There are 2 bolts up back behind here that you will have to get to by hand. Next what we are going to do is remove the tail lights. I know that is not normal, but to do this you will have to <b>...</b>

Keywords

Chrysler, PT, Cruiser, 2006, Hitch, Installation, Install, Draw, Tite, Drawtite, hidden, valley, reese, curt, etrailer.com, etrailer

Related videos ^Experimental