Trailer Hitch Installation - 1991 Dodge Dynasty - etrailer.com

Description

www.etrailer.com Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. Today we are going to install part number 36136 on a 1991 Dodge Dynasty. Where the hitch installs on this vehicle, it will install on the two EA bolts right here - the Energy Absorber. The hitch will sit on top of this plate and get bolted back into place, and then it also will attach to one of these holes back behind the energy absorber, in the frame here. And we do the same thing on both sides. However, we will have to modify the exhaust lower, before we are all said and done, on the drivers side. And this is the exhaust bracket that we will have to lower and modify, but for now we will just go ahead and unbolt it into the frame plate here. And we will leave that there, that just like that, for now. All right, next we will go ahead and install our bolts into this hole right here. And we will pull the hardware from this hole and we will pull it out back through here. So let us use our piece of safety wire. We will slide our plate inside and then we will thread our safety wire around our bolt here, and then up and back through. We do the same thing on the drivers side. All right, at this point we can start hanging the hitch on the frame. And this is kind of a wide hitch, so it is a good idea to have an extra set of hands with this one. When you do the drivers side, make sure you stick this block between the hitch and the frame. And the <b>...</b>

Keywords

36136, draw, tite, draw-tite, hidden, hitch, receiver, install, installation, 1991, 91, dodge, dynasty, etrailer.com, etrailer, valley, curt, reese

Related videos ^Experimental